Home > Inspection Systems > Sprinter

Sprinter Inspection System

Features

Sealed diamond plate floor with storage areas behind reel
Cobra Mainline Reel with power rewind, automatic freewheel, electronic interlock brake, heavy-duty level wind assembly with eight slip rings (12 slip rings available). Up to 1,500 ft cable capacity on reel
15 gallon Wash-down tank with 45 psi, 12V DC water pump. 20 ft. hose on a retractable reel mounted at rear of vehicle
System power supplied from 2500 Watt Sine Wave Inverter mount on side wall in the equipment room with 8D 12V 225 AH Gell Cell on floor in a battery box behind video reel. Inverter operates without engine support in excess of four hours. Gell Cell is charged when main engine operated from vehicle alternator
Generator with external access and slide out available if specified
Optional two-drawer tool box installed under Reel frame for parts and tools
Optional 15" rear monitor

Inverter power ideal for TV inspection van applications
Inverter delivers a constant 2500 watts at 120VAC, 60Hz with the capability of 6500 watt surge making the inverter ideal for video inspection applications
80 amp battery charger built into the inverter for overnight charging if required. The inverter provides ample power to operate 24 hours per day when supported by vehicle charging system
8D Gell Cell is recharged from vehicle engine alternator through an isolator which prevents any possibility of the video equipment discharging the vehicle battery
Automatic house power transfer relay standard
Battery Life: 800 recharges (approximately 3 to 4 years)
Replacement battery approximately $300 Available locally

All features and specifications listed are for example only and are subject to change. All systems are customised to meet the needs of the customer.